Ways to Save Energy and Money

Did you know the average family spends over $1600 a year on utility bills alone?   Here are some simple steps you can take to not only save energy but also put some money back in your pocket.

1. Put your thermostat to work
The U.S. Department of Energy (DOE) recommends setting your air conditioner at 74 degrees and your furnace at 68 degrees.   Investing in a programmable thermostat is a good idea. Set the thermostat to be warmer or colder when you are not home. Reduce the difference in temperature between the inside and the outside of the home to help save energy and money.

2. Invest in energy-efficient appliances
You may notice now that washers, dryers, refrigerators, freezers, dishwashers, air conditioners, and computers now come with Energy Star labels which mean they are energy efficient.  Each time you turn on an Energy Star appliances will save you money over an older appliance.

3. Unplug
Computers, stereos, toasters, and other appliances draw energy even when they are turned off. A large LCD or plasma TV consumes about 400 watts of energy when in use and 4 watts when not in use.  Using a surge protector will help reduce energy costs. Plug your appliances into a surge protector and turn off the protector when appliances are not in use.

4. Seal it up
A well-insulated house is a way to save money on heat and cooling costs. First, start by adding insulation to the attic floor. Next, make sure to fill in any holes in exterior walls especially where pipes come in and around windows and doors. Lastly, wrap hot water pipes with insulation.

5. Slow the flow
Install low-flow fixtures to conserve water on your shower, faucets and toilets. Also remember to repair leaky faucets and toilets and turn off the water when brushing your teeth and scrubbing dishes.
 
For further information contact John Flavin at 617-479-1000